Product details:

The Hospeco ProWorks GL-N103F nitrile, powder-free, disposable examination glove is textured along the length of the fingers for improved grip compared to a glove with textured fingertips. It meets Food and Drug Administration (FDA) regulations for food contact (21CFR, 170199). This glove has a palm thickness of 3 mils and a finger thickness of 3 mils and is 9.5" long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 2.4 mils thick. Nitrile provides better elasticity than vinyl, better puncture resistance than latex or vinyl, better abrasion resistance than chloroprene, and reduces the likelihood of allergic reaction. This powder-free glove leaves no residue, reducing the risk of contamination compared to a powdered glove. This ambidextrous blue glove is suitable for automotive, janitorial, law enforcement, food service, and salon applications.SpecificationsMaterialNitrile, powder free - Palm thickness3 mils - Finger thickness3 mils - Cuff thickness2.4 milsLength9.5"ColorBlueMinimum tensile strength14 megapascals (MPa) before and after aging - Elongation before aging500%Elongation after aging400%Acceptable Quality Level (AQL)4.0Tensile strength, measured in MPa, is the amount of force required to rip a glove; the higher the number, the stronger the glove material. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage; the higher the percent, the more the glove can stretch. AQL is an FDA quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves. - Disposable and limited-use gloves are used in medical, forensic, scientific, food service, and industrial applications. Disposable gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for use on either hand, some can be purchased in hand-specific models. They are